Garage Door Repair Metal Track Maintenance
If your garage door has been running noisily, bouncing on its track, or sagging on one side, do not wait any longer to figure out what is wrong. Keeping an eye on these basic garage door repairs will increase the lifespan of the door as well as help you avoid larger problems in the future.
Identifying problem areas
With the door closed, run a thorough examination of the metal tracks inside your garage. Check for loose hardware along the length of each track, watching for loose bolts or screws on mounting brackets and spring mounts in particular. If your door rolls up in sections, replace any damaged hinges or tighten the screws on loose ones. Roll-up doors have a vertical track which will also need to be examined once the door is open and out of the way.
If your hinges are loose but not broken, the screw hole may be enlarged or stripped. You can replace the screw with a longer one glued to an empty fiber plug, which you can find at any hardware store. You can also use wood glue or filler to repair tiny cracks in the wood near the hinges. If you notice major cracks or breaks, you may need to replace the wood, re-attach the hinges, and then realign the tracks.
As you examine the tracks, keep an eye out for dents and crimps in the metal. Damaged areas can be easily worked out by using a rubber mallet, or with a hammer on a small square of wood held on the dent. If the tracks are badly dented or damaged in several places, however, it is better garage door repair Herriman to replace them entirely.
The tracks along the garage wall accumulate dirt and grease over time, which can harden and cause operational problems. Using a concentrated household cleaner, clean the tracks and rollers thoroughly. Do not leave them damp to air-dry; instead, use a clean towel or scrap rag to dry all components completely.
If your door has developed a particularly noisy ascent or descent, consider a light application of lubricant, silicone spray, or powder. These can be applied to the tracks, rollers, and pulleys.
Garage door realigning repair
If your metal tracks are loose or have been hit, your door will not operate quietly or smoothly. To avoid further damage to the tracks or rollers, make adjustments as soon as you notice a potential problem. A garage door which swings up has only horizontal tracks, which should slightly slant down toward the back of your garage. Without completing removing the mounting brackets, you can loosen the bolts or screws and carefully tap the tracks back into position. Garage doors that roll up from vertical to horizontal tracks require more work to ensure all parts align equally and accurately.
Many garage upkeep issues can be solved as a do-it-yourself project. Still, do not hesitate to call a specialist for major garage door repairs. Proper maintenance is imperative to ensure your door works properly and has a long lifespan.